ANTIQUE GAMING TABLE, MAHOGANY OVAL PEMBROKE TABLE, WRITING AND WORK TABLE, ANTIQUE SERVING TABLE, REGENCY STYLE MAHOGANY LIBRARY TABLES

A LARGE GEORGE III SEMI-CIRCULAR GAMING TABLE
with a baize-lined interior with six square tapering legs,
4ft. 5in. wide (135cm.) circa 1780.

A PAIR OF GEORGE III SEMI-CIRCULAR MAHOGANY CARD TABLES, the tops crossbanded in satinwood and each with a semi-circular shell medallion, the friezes set with oval paterae and

raised on square tapering legs with castors, 3ft. wide (92cm.) circa 1785, tops split.

A GEORGE III MAHOGANY OVAL PEMBROKE TABLE,
with a satinwood banding and a tulipwood crossbanding,
the curved frieze with a drawer, on square tapering legs
with castors.

A GOOD AND LARGE GEORGE III SERPENTINE FRONTED DINING ROOM SIDE TABLE, the frieze centred by a panel carved with grape swags, raised on six circular tapering legs headed by

leaves and with bands and petals, the front four headed by grape swags, 3ft. 2in. high by 9ft. Vhin. wide by 4ft. deep (96cm. by 278cm. by 122cm.) circa 1785, originally with

brass gallery.

A GEORGE III MAHOGANY ‘D’-SHAPED SIDE TABLE
crossbanded in satinwood and with boxwood and ebony
stringing and a frieze drawer, on square tapering legs
and block feet, 2ft. 5V2in. high by 3ft. wide (75cm. by
91.5cm.) circa 1790.

A PAIR OF GEORGE III MAHOGANY D-SHAPED BREAK-
FRONT CARD TABLES, the hinged top, with a baize-lined
interior, the frieze inlaid with boxwood stringing, on
square tapering legs, 2ft. 5in. high by 3ft. wide (74cm. by
92cm.)

A GEORGE III MAHOGANY WRITING AND WORK
TABLE, with adjustable hinged leather top crossbanded
in kingwood with a slide and a dummy drawer in the
frieze, with a drawer at the side and a work bag, on
square tapering legs, 2ft. 5in. high by lft. Hin. (74cm. by
58.5cm.) circa 1790.

A GEORGE III MAHOGANY WRITING TABLE, the rectangular leather-lined top with outset rounded acanthus leaf-carved corners, the frieze with a pair of opposing drawers, on turned

tapered legs carved with acanthus leaves and a band of drapery, on brass castors, 2ft. 5Vzin. high by 4ft. 2′Mn. wide (75cm. by 128cm.) circa 1790.

AN ATTRACTIVE REGENCY PENWORK WORK TABLE, the top with an oval panel decorated with chinoiserie figures at an al fresco music party, with an anthemion border and flowered

surround, on two pairs of ringed legs with outcurved supports, 2ft. 4Y2in. high by lft. 9in. long (72cm. by 53cm.) circa 1800, originally with a slide.

A LATE GEORGE III OVAL MAHOGANY TABLE, the
top decorated in painted paper with flowers on a cream
ground with a frieze drawer at one side and raised on
slender turned tapering legs with turned X-stretchers,
2ft. 5V2in. high by 2ft. long (74cm. by 61cm.) circa 1800,
drawer now stopped.

A GEORGE III MAHOGANY SIDE TABLE, the rec-
tangular top with rounded corners and a frieze drawer,
on square tapering legs ending in spade feet, 2ft. 4in.
high by 2ft. Win. wide (71cm. by 86cm.) circa 1790,
originally a card table.

A SMALL JAPANESE LACQUER COFFER with domed
lid decorated with panels of flowers and a horse in shades
of gilt on black, lft. wide, late 18th Century/early 19th
Century; now raised on a Regency ebonised Table with
rectangular triple ‘bamboo’ cluster column pillar and
concave triangular platform table, 2ft. 2in. high by lft. 4in.
long (66cm. by 41cm.)

A REGENCY MAHOGANY CARD TABLE with hinged swivelling top, the frieze inlaid with stars and crescent moons, on two pilaster supports and concave base supported by downcurved

sabre legs and castors, 2ft. 5lhin. high by 3ft. zoide (75cm. by 91.5cm.) circa 1820.

A PAIR OF LATE GEORGE III MAHOGANY CARD
TABLES of rectangular form and with rounded corners,
raised on elegant circular tapering legs with shaped
collars and feet, 2ft. lOin. wide (87cm.) circa 1805.

A REGENCY CONCAVE-FRONTED MAHOGANY SERVING TABLE with a boldly reeded edge, the front with string-ing and a central panel applied with a brass anthemion mount, raised on

circular tapering reeded legs, the front two headed by anthemion panels en suite with the frieze panel, 3ft. high by 6ft. 6in. wide (92cm. by 198cm.) circa 1810.

A LATE GEORGE III SEWING TABLE, the rectangular top with a moulded edge and a shallow drawer fitted with divisions above a double long drawer and bag frame, on turned tapering

legs and brass castors, 2ft. 6in. high by lft. lOin. wide (77.5cm. by 56cm.) circa 1810.

A GEORGE IV MAHOGANY PEMBROKE TABLE, the top with rounded corners and crossbanded in satinwood, with two frieze drawers and slender turned legs, lft. 8in. long by 2ft. Vkin.

open (51cm. by 64cm.) circa 1815.

A GEORGE IV OVAL MAHOGANY DINING TABLE, the hinged top with a reeded edge and raised on a turned pillar and four moulded downcurved legs, 3ft. 9′Mn. wide by 4ft. 3in. long

(116cm. by 130cm.) circa 1820.

A GEORGE IV GILTWOOD CENTRE TABLE with
rectangular top, the frieze carved with guilloche and
flowerheads, on heavy cabriole legs carved with
palmettes and flowering branches and ending in paw
feet, 2ft. 6in. high by 3ft. 7in. wide (77cm. by 109cm.)
circa 1820, constructed from a pair of side tables, black
marbletop.

A GEORGE IV MAHOGANY DROP-LEAF TABLE, with
reeded edge and rounded corners and simple turned legs,
3ft. 3in. wide by 4ft. 5in. open (99cm. by 135cm.) circa
1820.

A MAHOGANY SOFA TABLE with canted corners, two dummy and two real drawers, on later ring-turned frame and downcurved legs, 2ft. 4′/2in. high by 5ft. 2V2in. wide (72cm. by

159cm.) part early 19th Century.

A LATE REGENCY MAHOGANY SOFA TABLE, cross-
banded in rosewood and inlaid with boxwood stringing,
with two real and two dummy drawers, on lyre supports
joined by a serpentine stretcher, on downcurved sabre
legs and brass castors, 2ft. 4V2in. high by 5ft. l’Ain, wide
(72cm. by 156cm.) circa 1820.

A PAIR OF REGENCY ROSEWOOD CARD TABLES, the
swivelling baize-lined tops with rounded corners and
inlaid with brass stringing, over the similarly inlaid
frieze centred by a rectangular brass moulded panel, the
simulated rosewood acanthus-leaf carved baluster stem,
brass inlaid and on down-swept legs ending in castors,
circa 1815.

A GEORGE IV MAHOGANY TWO PEDESTAL DINING
TABLE of unusual form, each rectangular end with a
drawer and a flap raised on a turned pillar, the concave-
sided rectangular platform on four canted scrolled legs,
3ft. 5in. wide by 4ft. Hin. fully extended (104cm. by 105cm.)
circa 1820.

A PAIR OF WILLIAM IV ROSEWOOD-VENEERED CARD
TABLES, each swivelling rectangular top with rounded
corners and a burr-yew banding, the friezes and square
pillars outlined with bead mouldings, and raised on a
concave-sided square base with burr-elm scroll feet,
3ft. wide (91cm.) circa 1830.

A GEORGE IV MAHOGANY SOFA TABLE of good
colour, and the top with rounded corners crossbanded
in rosewood with a frieze drawer and a pillar on a concave-
sided rectangular base with hipped cabriole legs, outlined
throughout with narrow bead mouldings, 4ft. TMn. open
(141cm.) circa 1825.

A PAIR OF REGENCY STYLE MAHOGANY LIBRARY TABLES in the manner of Thomas Hope, each baize-lined top with canted corners and hinged bookrest, with three frieze drawers at the

front and back and circular tapering reeded legs with ebonised paw feet headed by metal puma ring handles, 5ft. wide (152cm.).

A REGENCY MAHOGANY SOFA, the moulded frame with over-scrolled ends of equal height, the seatrail set with three diagonally reeded panels raised on sabre legs, 6ft. 4in. long

(193cm.) circa 1820, possibly Scottish.

A WILLIAM IV ROSEWOOD AND MAHOGANY WORK TABLE, the rectangular hinged top with solid gallery and canted corners, above one dummy and one real bead-decorated frieze drawer and an

upholstered work-bag beneath, the acanthus leaf carved end standard supports supported by double eagle head scrolls to a platform support and acanthus leaf-carved eagle heads,

2ft. 5′Mn. high by lft. 9in. wide (75cm. by 53cm.) circa 1835.

A WILLIAM IV ROSEWOOD-VENEERED CARD TABLE,
the swivelling top with rounded corners above a panelled
frieze, raised on a pillar, the leaf-carved base on a concave
rectangular platform and four scroll and paw-carved feet,
2ft. lVhin. wide (90cm.) circa 1825.

A GEORGE I WALNUT KNEEHOLE WRITING TABLE
with a rectangular top, a drawer in the frieze above the
kneehole which contains a shallow drawer and recessed
cupboard, with three drawers in each pedestal, 2ft. 7in.
high by 2ft. 7in. wide (79cm. by 79cm.) circa 1725, top and
bracket feet replaced.

A Queen Anne period dressing table - A George III mahogany dressing table - country dressing table in walnut and fruitwood

Towards the end of the seventeenth century the small tables in walnut and oak or country woods specifically designed as dressing tables made their appearance. Before that it seems to have been the practice to use a
small side table with perhaps a small desk with sloping lid or mirror on it.
Since they were designed to be decorative as well as functional, dressing-tables have produced some of the most sophisticated and pleasant pieces of their periods. Their natural appeal to women of a much later
period than those of that for which they were designed has always kept them to the forefront of demand.
Dressing tables of the walnut period exhibit all the most desirable features of walnut veneered furniture: quartered tops with herringbone crossbandings; cross-grained mouldings; turned legs with early forms and
stretchers or, later , cabriole legs with scrolls, and so on. As a microcosm of period features and because of their small size, they have become very sought after and hence very expensive.
The later eighteenth century dressing tables in mahogany and country woods make no less ideal collectors pieces and hence are also greatly in demand. So far Victorian examples have not followed the analogy of
chairs and dining tables perhaps because the Victorians tended towards larger dressing tables without the same appeal.
Value points: The followingvalue points apply to the examples illustrated.
1. Top Surface. As with other tables, the condition, patina and figuring of the top surface are important. The more perfect and decorative the appearance, the more the .. factor will apply.
2. Structural Condition. This is again assumed to be good.
3. Legs. Depending on the period, the design,and always the proportion,of the legs is an important factor. Legs are always liable to damage and their condition and originality constitute a  factor if good.
A Queen Anne period dressing table and mirror set of c.1710 which are japanned in a light background with flower decoration. The table shows the typical arch shaping of the frieze and there are two acorn pendants
on the centre arch. The octagonal legs taper down to turned shaping and bun feet. The X stretcher with its scroll shaping has a central circular pedestal for a bowl. Note that the table top has a thumb-nail edge
moulding and there is a half-round or ‘D’ moulding on the front around each drawer. The mirror is described in the Toilet Mirror section.
Small walnut William and Mary period dressing table, c.1690. The top would be veneered in walnut, quartered to give a symmetrical pattern from the figure, and with a’herringbone’ or ‘feather’ inlay around it, inside the
cross-banding. The thumb-nail moulding around the top edge and indeed the decoration of the top is similar to chests of drawers of the period. A half-round moulding around the drawers is also typical. In the frieze it is usual to find a shallow centre drawer and two deep ones on either side, or two short drawers. The arched shaping of the frieze is typical. Drawer pulls are of peardrop shape in brass and on a circular or star-shaped plate, the handle being linked to a double strip of brass or iron which was passed through a small hole in the drawer front, parted, pressed down and pinned into the wood. The inverted cup form on the legs, as mentioned earlier, shows the Dutch influence, and the bun feet and shaped veneered stretchers are also typical.
Value Points: Decoration of top  Proportion of legs
Queen Anne walnut dressing table, c.1710. Note that the turned legs of the William and Mary period have now changed to cabrioles although the shaping of the frieze remains similar. The top edge moulding, veneers and drawer arrangement are still in the earlier style.
Quality of carbriole legs  Original handles
Oak dressing table of c.1740. The square section cabriole legs are still of slender shape but not the most desirable form, particularly if heavy. The shaping of the frieze has become much more sophisticated. Note the top edge moulding.
Value Points: Walnut  Fruitwood
A George III mahogany dressing table with square legs chamfered at the back, c.1770. An unpretentious table whose origins are clear from previous illustrations and of a type increasingly popular. The top edge still retains a moulding derived from the thumb-nail but now more sophisticated with an ogee curve.
Walnut dressing table, c.1720. The rather deep full top drawer gives a slightly top-heavy effect since the cabriole legs are rather slender. The top edge moulding is a refined thumb-nail type. The top veneer is quartered and cross-banded-, the drawers are edged with cock-beading and have a feather or herringbone cross banding. The handles are not original. A poor photograph which makes the piece out of proportion.
A later Georgian c.1780, country dressing table in oak. The frieze is shaped, but the slightly tapered legs hint at Hepplewhite influence. The drawers are cock-beaded and the top edge has a rather refined moulding.
Tapering legs tend to be a later feature.
George I period dressing table in fruitwood, c.1725. The arched shaping of the frieze is similar to that of earlier periods, with the projecting lip moulding or cock-bead around it. The heavy thumb-nail top edge moulding of the earlier period is now more refined. The tapering legs ending in pad feet are simpler than the cabriole but retain an elegance and proportion of design in a particularly English leg form. The handles are not original.
Later Georgian, c.1770, country dressing table in walnut and fruitwood. The three drawers in the frieze are cross-banded in fruitwood like the top, which is veneered in plain straight grained walnut. The legs are elm.
A satinwood dressing table of Sheraton period, c.1795, with mirror which folds flat to lie under the folding top. Similar designs for shaving tables and lady’s cabinet dressing tables of involved character are to be found, but this is one of the more popular designs of the period.
Value Points: Satinwood ….
Original Mirror
A mahogany dressing table of c.1820, with replacement handles. The square tapering legs and rectangularity of design reflect a Sheraton influence. The black stringing lines around the top and the drawers and frieze
are often identified with this period. Useful also as occasional writing tables, these pieces are understandably popular, as well as having a simplicity of design which allows them to blend easily with modern decor.

Antique Work Table - A Regency Work Table in Mahogany - A Victorian Walnut Work Table

Work tables for use by ladies, with space for needlework materials in a well below were a later 18th century phenomenon and were made in a variety of forms. We have illustrated some typical examples and have
included a number without the silk bag but with small drawers instead. It can be mentioned that Sheraton illustrated some designs, as did Gillows. In the Regency period and after, some very elaborately decorated
designs appeared in a variety of styles; the later Victorian type of octagonal form, with tapering well, supported on a tripod base, have recentlybecome popular and are being sold in a range from 15-25 depending on the veneered surface decoration.
A Regency work table in burr walnut with side drop flaps and three drawers, on Disneyesque paw feetwithreeded scrolls. Under the lowest drawer a slide acts as a drawer frame for the pleated silk bag.
Value points: Burr walnut
A Regency mahogany work table with drop flaps and a centre drawer with work bag sliding beneath. The end supports consist of two turned columns on raised feet and a turned stretcher, in the style of the columns
connects the two.
Figured woods and inlays  Quality of turning
A Regency yew wood work table on a turned baluster stem and four carved feet ending in brass paw casters. An unusually circular piece, which, had it been in any other wood than yew, should not have been priced at
more than 50.
An early Victorian mahogany work table with folding top, two drawers and silk bag on slide. Supported on an octagonal centre column on shaped platform on turned flat bun feet.
A late Georgian mahogany work table with three shallow drawers, inlaid with boxwood stringing. Note here again the slightly ‘bamboo’ effect in the turning of the tapering legs.
Choice of figured woods and inlays Quality of leg turning
A simpler mahogany work table of the later Georgian or Regency period. The turned legs are simply executed and the mahogany is not greatly figured. The casters are original.
Figured woods and inlays … Quality of leg turning
A Regency period work table on tripod stand, in mahogany. There are two flaps, Pembroke table style, which can be supported on brackets, to give greater surface area to the top. The two drawers open at the visible
end; on the other end two mock drawer surfaces are included to give balance.
Elegance of tripod stand  Choice of figured woods and inlays
A Regency work table in mahogany with three drawers veneered in figured wood. The centre column is turned and carved with leaf pattern. The four carved legs end in paw feet on casters. Note that the drawer fronts are cross banded.
A japanned and painted work table of c.1840. It is constructed on the Pembroke table principle with two side flaps which are supported by small hinged wooded brackets. The drawers are cock-beaded.
Quality of painted decoration …
Mother of pearl inlays
A Victorian walnut work table of c.1860 date. The octagonal top lifts to give access to a compartmented interior and the tapering central column is hollow to allow for storage of wools. It is raised on carved cabriole legs. Usually the tops of such pieces are veneered with a thin sheet of decorative burr, but mahogany and rosewood examples with variations exist. Marquetry inlaid tops are also fairly common in the walnut varieties.
The lids usually made of cheap pine on to which the mahogany was veneered, often warped and, therefore, do not close properly.

Mahogany Pembroke Table - Mahogany Writing Table - Regency Period Dining Table - Mahogany Library Table

A Thomas Sheraton mahogany Pembroke table, the top cross banded with herringbone bands of kingwood, with a rising ‘Harlequin’ section with a fall-front inlaid with ribboned festoons of flowers in scorched and green fruitwood, in the manner of Pierre Langlois, the frieze with a drawer either side and simulated drawers, on square tapering panelled legs.
The design for this ‘Harlequin Pembroke Table’ was published by Thomas Sheraton as plate LVI in his ‘Drawing Book’ (1791-94). In his notes he describes such table as “serving not only as a breakfast, but also as a writing table, very suitable for a lady. It is termed a Harlequin Table, for no other reason but because, in exhibitions of that sort, there is generally a great deal of machinery introduced in the scenery”. This type was also illustrated in Hepplewhite’s Guide.
This table is of further interest in that the ’till’ is inlaid with a floral garland, knotted with a ribbon-tie, in a marquetry of many woods. This is reminiscent of the highly distinctive style of inlay favoured by the emigrant French ebeniste, Pierre Langlois.
A Sheraton mahogany Pembroke table of c. 1810, The square tapering legs have given way to the centre pedestal, the pillar of which is fluted. The four sabre style legs which support the platform at the pillar base have typical later Georgian and Regency brass casters of decorative style. The top is veneered in highly figured mahogany and cross banded with satinwood, which is used for the inlaid decoration also.
Value points: Inlaid decoration of high quality
Good quality Pembroke table in mahogany with cross banded top edge. The tapering legs end in elegant brass casters.
Value points: Cross banding of top  Circular or oval shape
Later Georgian period mahogany writing table on turned legs with casters beneath.
A fine quality late 18th century sofa table in mahogany and satinwood. The end supports, curving elegantly out from the vertical to end in brass casters, are particularly noteworthy.
Regency period dining table in mahogany on two turned columns each supported by three curved legs. The shaping of the turning on the columns suggests a later part of the period, as do the legs, but the top is reeded round the edge and light in appearance.
Elegance of columns  Lightness of design  Seating capacity 4  6  8  12
Sofa tables are similar to the Pembroke table with the exception that the extending flaps are at the end instead of the sides. They seem to have become popular at about the same time as the Pembroke. The normal dimensions, referred to by Sheraton, “are generally between five and six feet long and from 22 inches to two feet broad”. The most serviceable type have two drawers and they were frequently used to write, draw or read upon. A variety of designs were used.
The example above is of c. 1805 date and has brass mounts and stringing. The inward curving legs are reeded. Rosewood and zebra wood were used for the higher quality examples as well as mahogany. The addition of brass stringing or more detailed inlay in brass adds considerably to value.
Value points: Exotic woods and inlays
A Regency period dining table on two columns, again each supported by three elegantly curved legs. The apron frieze under the two end sections tends to add weight to the overall effect and breaks the line.
Value points: Elegance of columns  Lightness of design  Seating capacity 4  6  8  12
Mahogany Sofa Table of later Georgian period. The reeded curved legs on the end supports terminate in brass paw casters.
Regency sofa table in mahogany with lyre-shaped end supports. The top edge is moulded as well as cross banded.
Note. The existence or hint of the lyre motif in any form inexplicably pushes prices to the top of the range.
Regency mahogany library or writing table. A derivation in some ways of the sofa table. The end supports show in their design the influence of the lyre motif.
Regency sofa table with gadrooned top edge. The curving splayed legs on the send supports are reeded.
Sofa Table of slightly later date c. 1810 with turned supports in conjunction with inward curving legs. This form of centre support is to be found on card and other tables of the period.
Regency period breakfast table in mahogany, cross banded with kingwood. The octagonal column is on a platform supported by unusual curved and shaped legs ending in brass paw casters. The spur shape on the knee of the legs is particularly unpleasant.
Value points: Seating capacity 6  8 …
Regency rosewood sofa table ,the top and flaps cross banded in satinwood. The stringing which can be seen round the drawer fronts is of brass, and brass stringing is also used on the top and in the unusual curving
support and base. The table when extended is five feet long.
Regency period mahogany card table on turned centre column. The hinged folding top pivots on the frame which forms the frieze to provide support when open.
Regency mahogany library or ‘rent’ table with leather-covered top. A type introduced in George III’s reign which Was made on into the 19th century, sometimes with an octagonal top. Used sometimes on estates where the relevant documents were kept in the drawers; hence the popular term ‘rent table’.
A Regency rosewood and Coromandel console table with marble top. Originally made to accompany pier glasses, console tables were made uniquely for side use and in the early 18th century types were of highly
baroque decoration. The classical revival of the later 18th century produced console and side tables of prevailing fashions and both Sheraton and Hepplewhite illustrated examples. They were largely for the decoration of more important houses.

A Chippendale mahogany card table - A George III satinwood and marquetry card table - A Sheraton period mahogany serpentine fronted side table

A ‘Chippendale’ folding card or tea table in mahogany with reeded square legs, serpentine front and elegantly shaped frieze. Of c. 176070 date. Tables of this kind are always higher in value if of the ‘tea’ type i.e. with
solid wood surface on the interior rather than ‘card’ i.e. with a baize interior.
A Chippendale mahogany card table of c. 1760 with a green baize lined folding top. The edges, frieze and square chamfered legs are fretted inthe Chinese manner, which inexplicably makes this normally rather
underpriced piece of furniture double its value.
N. B. See note under previous example concerning plain mahogany baize lined versions at  and ‘tea’ versions with polished wood interior up to.
A mahogany circular folding table of c. 1790 with Hepplewhite-cumSheraton influence in the design. A type which could be used as a games or tea table, the latter usually being claimed when the inside is not lined with baize but veneered in the manner of the outside. The stringing lines add considerable elegance as do the oval medallions in the panels at the top of each leg.
Value points: Matched figuring of mahogany and stringing
A George III satinwood and marquetry card table with a folding circular top cross banded with rosewood. The inlay consists of urns and flowerfestoons withina meanderingband of anthemionand thefrieze is similarly
inlaid. The square tapering collared legs with the oval medallions at the top are of a kind generally associated with Sheraton designs. These tables were frequently made in pairs.
It would be difficult to find more highlyvalued tables of this period.
Value points: Quality of decoration
N. B. Inferior Edwardian copies abound
A Sheraton period mahogany card table cross banded with satinwood. Note againthe oval medals at the top of the tapering legs and the inlaid stringing lines.
It is to be noted that a pair of identical tables causes the individual piece to be more than doubled. Thus a pair of such tables would be in the 600-700 range.
A George III mahogany dressing table with square legs chamfered at the back. An unpretentious table whose origins are clear from previous illustrations and of a type increasingly popular. The top edge still retains a
moulding derived from the thumb-nail but now more sophisticated with an ogee curve.
A Sheraton period  Satinwood card table cross banded with rosewood. Note the tapering legs and the medal set in the top panel of the leg.
Value points: Satinwood
A Sheraton period mahogany serpentine fronted side table on tapering legs. An elegant design with interesting enlargement of the square section added as ornamentation near the bottom of legs.
A fine mahoganydining table of c. 1800 on turned columns each with three curved legs. The sweep of the latter from the central column out to the brass casters is particularly elegant. On such tables the centre section is generally bolted to the end pieces.
Pembroke tables are said to be named after the Countess of Pembroke, who first gave orders for one of them. It seems that they appeared about 1750 and were generally made in mahogany with square tapering legs.
The flaps on either side are supported by hinged wooden brackets. A drawer is usually to be found opening at one end while a mock drawer is put at the other to give design balance.
The example above is perhapsone of the finest of the fine: in satinwood, with marquetry inlaid, and cross banded with rosewood. It is on square tapering collared legs and the marquetry inlay consists of urns and
naturalistic festoons of flowers.
Price Range: This is a top of the table version;A country mahogany Pembroke table in heavy Cuban wood and with no drawer. The square chamfered legs owe more to the Chippendale influence than the tapering
variety normally associated with this type of table. A simple and pleasing version.
A rather broad mahogany Pembroke table with slightly tapering legs of c. 1790. The solid top is of a particularly finely figured wood and there is abroad boxwood stringing line under the cock-beaded drawer which is continued across the leg.

Antique Mahogany Sofa Table, Walnut Centre Table, Rosewood Card and Games Table - 18th-19th Antique Furniture

A ROSEWOOD LIBRARY TABLE, early 19th century and later.
With a tooled leather-lined top and two frieze drawers with dummy drawers to the reverse, on fluted column standard end supports and splayed and needed feet.
A PAIR OF WALNUT AND FEATHER-BANDED CENTRE TABLES, late 19th century
Each with a crossbanded oyster-veneered panel top inlaid with lines with lobed and roundel decoration, on cabriole legs terminating in pad feet.
A GILTWOOD SIDE TABLE, late 19th/early 20th century
With an associated green marble top, with a foliate frieze and pierced apron centred by an acanthus bound cartouche and hung with scrolls with oak and acorn swags, on acanthus headed cabriole legs terminating in
paw feet.
A GEORGE III AND SATINWOOD-BANDED CARD TABLE
With canted angles and baize-lined hinged top, on square tapering legs with spade feet.
A GEORGE III MAHOGANY, SATINWOOD BANDED AND MARQUETRY CARD TABLE
With canted angles, the top centred by a fan medallion within a flower and ribbon-tied husk decorated border, with a simulated fluted frieze, on husk decorated square tapered gaitered legs with brass caps and castors, the marquetry of a later date.
A VICTORIAN ROSEWOOD GAMES TABLE
With a sliding central panel with a chequerboard to the reverse enclosing a backgammon board, fitted with two frieze drawers, on tapered standard end supports joined by a ring-turned stretcher and terminating in
turned feet.
A WILLIAM IV ROSEWOOD READING TABLE
By Gillow, the adjustable top with two hinged racketed slopes, a pen compartment and a frieze drawer, on a tapered octagonal and baluster column, with a trefoil platform and castors, stamped twice Gillows.
A ROSEWOOD SOFA TABLE, early 19th century
With a rectangular hinged top and two frieze drawers, on standard and dual splayed end supports terminating in brass caps and castors.
A GEORGE III MAHOGANY SOFA TABLE
Inlaid with lines, the rectangular hinged top with D-shaped ends fitted with a frieze drawer and dummy drawer to each side, on standard and dual splayed end supports joined by a ring-turned stretcher terminating in brass caps and castors.
AN EDWARDIAN NEST OF THREE BLACK-LACQUER AND PARCEL-GILT OCCASIONAL TABLES
Each top decorated with birds, amongst bullrushes and trees, on dual ring-turned and splayed end supports joined by stretchers.
A REGENCY MAHOGANY BREAKFAST TABLE
Inlaid with ebony lines, the rectangular hinged top with canted angles with stellar motifs, fitted with a drawer to either end, one with a pen compartment, on two tapered supports, platform and stepped splayed
quadruped supports terminating in brass paw caps and castors.
A GEORGE III MAHOGANY SOFA TABLE
Inlaid with lines, with a rosewood and satinwood-banded hinged top and two frieze drawers, on standard and dual splayed end supports terminating in brass caps and castors A REGENCY MAHOGANY CENTRE TABLE
Fitted with two frieze drawers with dummy drawers to the reverse, on standard and reeded splayed supports, joined by a stretcher and terminating in brass caps and castors.
A GEORGE III MAHOGANY SOFA TABLE
With a rosewood-banded hinged top and two frieze drawers to either side on standard and dual splayed end supports terminating in brass caps and castors.
A VICTORIAN ROSEWOOD OCTAGONAL WORK TABLE
The hinged top enclosing a fitted interior and covered well, on four inswept and a central column extending to floral-carved splayed tripod supports terminating in scroll feet with castors.
A GEORGE III MAHOGANY OCCASIONAL TABLE
With a circular hinged top and extending baluster column with splayed tripod supports terminating in pad feet.
A MAHOGANY ENCLOSED GAMES TABLE
With a baize lined hinged top and two frieze drawers, on ring-turned tapered legs terminating in brass caps and castors 51in.
A REGENCY MAHOGANY OCCASIONAL TABLE
With a rectangular hinged top on a turned tapered and lotus-carved column and splayed tripod supports with brass caps and castors.
A REGENCY MAHOGANY READING AND WORK TABLE
The hinged racheted top with a stay, fitted with two drawers to one side on ring-turned tapered legs with brass caps and castors.
A GEORGE III MAHOGANY OCCASIONAL TABLE
The hinged top with a reeded edge and canted angles, on a ring-turned tapered column with splayed tripod supports terminating in brass caps and castors.
A REGENCY ROSEWOOD WORK TABLE
Inlaid with lines, with a satinwood-banded top and frieze drawer, on a ring-turned column and splayed quadruped supports terminating in brass paw caps and castors.
A SATINWOOD BREAKFAST TABLE
With a rectangular hinged top on a square section column and quatrefoil platform with bun feet and castors

A PAIR OF WILLIAM IV ROSEWOOD CARD TABLES.

Each with a circular baize-lined hinged top and turned tapered column, on a quatrefoil platform with paw feet and castors.The dished top (possibly associated) with re-entrant angles, on angled and turned cabriole legs terminating in faceted pad feet, restorations 32in.
A MAHOGANY TRIPOD TABLE
The circular top with a galleried edge, on an inverted baluster column and splayed supports terminating in pointed pad feet.
A GEORGE III MAHOGANY CENTRE TABLE
Fitted with a drawer to one end, on square chamfered legs 24V4in.

TABLES  dining, oak reproductions
A really heavy oak reproduction refectory table with primitive lion-mask carving, on six enormous carved bulbous legs. The sheer quantity of oak involved would make such a table enormously expensive to produce
today, let alone the question of the carved decoration. 1890-1920
A simpler oak ‘draw-leaf’ table on four bulbous carved legs. The stretchers have been jacked up off the ground by the addition of four square `feet’ at a later stage. The top has been panelled across the length which is considered a less attractive proposition by the trade. C. 1900
A rather unattractive oak ,refectory’ table which looks as though it has been ‘made-up’ from old pieces but the legs have turning which is plain and rather modern. No attempt has been made to ‘age’ the stretchers by
wearing down the edges.
Two oak draw tables from Maurice Adams, 1926. Straightforward, quite well-designed reproductions made to satisfy a contemporary taste for `Jacobethan’ dining rooms. Of quite high quality construction.
A cheap oak dining table, of the ‘draw’ type, on a two-pillar base derived from `Jacobethan’ but carefully ‘modernised’ to provide those streamlined, curved surfaces beloved in the late 1920s and 1930s. Note how the traditional turned ‘bulb’ on the supports have been modified into ribbed shapes of no particular beauty. The surface was originally dark-varnished with a sticky cheap ‘French polish’ which has become badly scratched. c. 1930
TABLES  work and games
A walnut combined work and writing table on turned end-column supports with scrolled feet connected by a turned stretcher. Under the hinged top there is an adjustable reading and writing flat covered with tooled
leather, and stationery compartments on each side of this flap. The drawer pulls out to provide a fitted interior and the wooden work bag below can also be pulled out for access. The figured walnut top surface, drawer and bag are inlaid with stringing lines and marquetry. The whole piece is very similar to one illustrated in the design book of C. & R. Light in 1881 but such pieces were popular throughout the mid-Victorian period. 1860-1885
A papier mach& work table inlaid with ivory and mother of pearl in floral patterns and scrolls. The design is not unlike those of the 1830-1840 period with a baluster central column and a flat base with four scrolled feet.
A walnut work and games table with inlaid chequer-board and backgammon board, on a twin-column end support stand with connecting turned stretcher. A type illustrated in manufacturers’ catalogues up to 1885.
A walnut work table of a type which was introduced in the late 1850s as an urn shape, but which had settled to this funnel or trumpet variety by the 1870s. This example is inlaid with floral marquetry and stands on
rather cocked-knee cabrioles with scrolled feet. The top has been inset with leather: this almost certainly means that the original marquetry top has been damaged and, to save expense, a new leather top has been
fitted. Damage to the top surfaces is frequent with these tables; the veneer was very thin and was easily lifted by heat or spillage of liquids. 1860-1880

TABLES  occasional, centre
A walnut centre table inlaid with a marquetry panel and with ormolu mounts. Very similar to the writing table 582 and, again, made in a French Louis XVth style of perennial popularity. Not as high quality as 582 but
nevertheless still a well-made and very decorative piece. 1860-1890
A centre table of Reformed Gothic character from Blackmoor House, c.1872 (see British Furniture, 1880-1915 by Pauline Agius, pl. 74). Possibly designed by the Manchester architect, Alfred Waterhouse, a friend of Norman Shaw. Waterhouse designed for Blackmoor, starting in 1869 and imitated Shaw’s ‘Old English’ style as used at Leyswood, which still had Gothic features such as the gate tower. The table is interesting in its construction of Reformed Gothic style and structure but incorporating half-and full suns of Japanese character and the spindled gallery. The move from Gothic to Anglo-Japanese can be perceived.
An interesting ebonised centre table with a turned spindled gallery connecting the end supports which are pierced and carved with stylised flowers and leaves. Of Reformed Gothic character but with later developments in the carving.
A mahogany centre table of rather Continental design on spun brass cup feet of a type associated with W.A.S. Benson, a designer for Morris & Co. who specialised in metalwork. The same feet are used on furniture
attributed to the firm of J.S. Henry (see British Furniture, 1880-1915, by Pauline Agius, p.94, pl. 112).
An occasional centre table of octagonal shape, in rosewood, with eight turned legs and a centre column joined by stretchers radiating from the centre. An arcaded apron also joins the legs. Possibly by Collinson & Lock. c. 1880
Another spider-like centre table with a moulded top edge, by Morris & Co. Made in mahogany. The firm produced several similar designs, available in mahogany or fumed oak. C. 1900
A six-legged mahogany centre table by a commercial firm of general furnishers. Clearly the type was popular up to 1914. Also available with only four legs.
A ‘Chippendale’ version of the octagonal mahogany centre table on eight legs. This time the radiating stretchers are pierced and fretted with scrolled work. The top edge is gadrooned. 1910-1920
An oval ‘Sheraton’ style centre table on four tapering square section legs ending in castors and connected by curved stretchers emanating from a central finial. The top is inlaid and crossbanded; there is satinwood
banding and boxwood stringing around all the normally approved edges.
Two small occasional tables of the type ideal for coffee or tea drinking in the sitting room. On the left, a scalloped top with dished edge and chinoiserie decoration, mounted on carved cabriole legs ending in hoof feet.
On the right, a segmented feather-veneered mahogany top with cross-banding, mounted on cabriole legs ending in hoof feet, with a lion mask carved at the top and a frieze also carved in bas-relief with scrolls and
shells. Nothing, of course, like these two tables was made in the periods from whose styles they have borrowed. The 20th century had advanced both comfort and practicality in arriving at the dimensions, then it has imposed the most marketable styles associated with high quality on to the design. 1920-1940
TABLES  occasional, tripod
The tripod table is an 18th century invention, probably developed from candle stands. It is still one of the most popular occasional tables and has been much reproduced.
A Victorian version of the tripod table, in walnut, with a scalloped edge in emulation of the 18th century ‘pie crust’ edge. The shaping of the column is unmistakably mid-19th century and the use of the finial below the
column is also characteristic of mid- to late Victorian furniture. The shaping of the legs is also not that associated with Georgian tripods. c.1870
A mahogany tripod table with a brass gallery rail around the circular top and decorative scrolled supports in addition to the centre column.  1900-1920
Mahogany tripod tables with moulded rims, fluted columns, reeded vases  spiral to the left, straight to the right  and elegant legs carved with acanthus leaf decoration. Essentially straight reproductions of 18th century tripod tables but looking shorter in proportion and the tops of a greater diameter than the period originals would probably have had. Good quality pieces, though. 1900-1920
TABLES  Sutherland
A walnut drop-leaf gateleg table of a type known in the trade as a Sutherland table (for some obscure reason). Made in mahogany or walnut (i.e. veneered in figured or burr walnut), these tables can be supported on a single turned column at each end, as shown above, or on a double column with spiral or other turning. There is an extra, thin, turned leg on a gate at each side which swings out to support the flap when open. They can be seen clearly above. The Victorians do not seem to have minded this rather unhappy lack of cohesion in leg design; the gatelegs often look like a pair of poles or walking sticks that someone has leant in random fashion against the frame under the flaps. The merit of the design is, of course, that the table, when folded, is very slim in end elevation and the whole is mounted on castors so that it can be tucked away neatly. The spiral grooving turned into the legs of the above example is often found on these tables.
An ebonised Sutherland table which shows very clearly how undesirable ebonised furniture looks when dusty and in poor condition. c. 1890
A similar design of Sutherland table in mahogany, with the same form of end columns and mounted on white castors. 1860-1890
A rectangular Sutherland table with spirally-turned double end supports on a simple arched foot design. The thumb-nail top edge moulding appears on almost all the tables at the time.

TABLES  writing
A satinwood ‘Carlton House’ writing table with oval panels in the upper doors. The type appears in Gillow’s cost books for 1796 and is also illustrated in the ‘Cabinet Maker’s Book of Prices’ of 1788. Carlton House was the residence of the Prince Regent. Gillows simply describe the piece as ‘A Ladies’ Drawing and Writing Table’. We tend to associate square tapering legs with Sheraton, but this type of table had a considerable revival in about 1890 and is still being made to the present day. (Harrods usually stock one or two.) Readers of the Price Guide to Antique Furniture will know from page 258, items 942-945 that there are marquetry ones, satinwood ones, plain mahogany ones and there are even painted ones. Variations in the design are very frequent in lesser Edwardian pieces.
1890-present day marquetry/satinwood satinwood as above painted/inlaid mahogany.
The borderline between a writing table and a desk or bureau is sometimes hard to define. On the whole a writing table remains a table, on four legs with some drawers in the frieze, but the Carlton House version is
almost a desk or bureau due to the upper structure. Here, we have followed accepted practice and, after the Carlton House version, show the simpler pieces of furniture.
An inlaid satinwood writing table in the French Louis XVth style on cabriole legs with ormolu mounts. The top surface has an inset leather area, crossbanded around it with additional inlay. The top edge has an ormolu moulding surround. 1860-1880
Three writing tables in 18th century styles, using square tapering or turned legs, brass ring handles with circular pressed plates and with drawers in the frieze. The central example has small upper drawers as well. All have an inset leather top.
Three writing tables of rather less quality. The central one is kidney-shaped and the other two are oak examples with square section legs. 1890-1920
An inlaid mahogany writing table in the ‘Sheraton’ style which also incorporates an oval mirror with flanking small drawers.
An oak writing table in ‘William ‘and Mary’ style, evidenced by the turned legs with inverted cups or ‘bells’ and the bun feet. The front stretcher has been thoughtfully omitted so as to allow the writer to get his or her
feet under the table without hindrance.

TABLES  gateleg
The gateleg table was a great favourite of the 17th and 18th centuries. It did not die out in the 19th century but continued in other forms, like the Sutherland (q.v.) table.
During the last quarter of the 19th century, however, it was back to the Good Old Days for gatelegs, as with so many other forms of furniture. The oak gateleg was back in its late 17th century form, to meet the prevailing demand aroused by the medieval and ‘Olde Englishe’ taste.
Two oak gateleg dining tables of good reproduction of styles of 1670-1720. The top example has the column turned legs  here slightly balustered  which were put on many conventional tables of this sort at the end of the 18th century. The lower table features spiral or twist turning to the legs (but not the stretchers, which are left square) which met ‘Elizabethan’ taste, but which in fact dates back to 1670-1690. Both tables have a give-away feature for those anxious to identify period. Both have a deep ‘thumb-nail’ or ovolo moulding around the top. This is not a feature generally to be seen on period tables and was much used by reproducers from 1900 onwards. 1900-1920
Two occasional gateleg tables of small size from Maurice Adams. The top one, with a robust end Igunbarrel’ column, emulates an early small gateleg of the 1670s. The lower example is more conventional with column
turning and square stretchers. Both have a ‘thumb-nail’ top edge moulding. They are intended for lounge or drawing room use, not for dining. c. 1925
A white deal gateleg table of the old type of construction shown by Percy Wells c.1920. Wells liked the enduring virtues of the gateleg  the design variations to top and leg, the convenience of storage, and use at half or full dimension. Unlike the Pembroke, it is hard to top over because of the leg support, but this very virtue is a drawback since the legs get in the way of the sitter. Wells proposed to overcome the objection of the low foot rails by setting them back from the legs and projecting the top further over. He also proposed a change to the gate system to avoid halving the leg or the long rail. He shows drawings of the new system but not a photograph. The table shown above is 5ft. long by 2ft.10ins. and, as Wells points out, is much more costly to construct than a plain kitchen table of the same size on four legs.c.1920
Two small lacquered gateleg tables for occasional use, in the chinoiserie style much revived in the 1920s. The legs are extremely slender and the tables are clearly not designed for much other than ornamental
purposes.
A reproduction oak gateleg table with twist-turned legs. Note the flat stretchers without any form of incised moulding and the heavy ‘thumb-nail’ or ovolo moulding around the top. Both features are strong indications of a reproduction as against a 17th century original. Made in a fairly cheap oak and stained or semi-French polished to give a darkened aged appearance, but this finish is apt to scratch or chip off. This type of table was made in enormous quantities. There are container loads of them available from trade shippers specialising in this kind of furniture but recent activity has increased the price, which in 1979 was a standard 38 or so. 1920-1930